Netgear M4100-12GF (GSM7212F) - ProSAFE Gigabit L2+ Managed Switch Guía De Administador

Attach the defined policy to interfaces 1/0/1 through 1/0/4 in the inbound direction.

(Netgear Switch) (Config)#interface 1/0/1

(Netgear Switch) (Interface 1/0/1)#service-policy in internet_access

(Netgear Switch) (Interface 1/0/1)#exit

(Netgear Switch) (Config)#interface 1/0/2

(Netgear Switch) (Interface 1/0/2)#service-policy in internet_access

(Netgear Switch) (Interface 1/0/2)#exit

(Netgear Switch) (Config)#interface 1/0/3

(Netgear Switch) (Interface 1/0/3)#service-policy in internet_access

(Netgear Switch) (Interface 1/0/3)#exit

(Netgear Switch) (Config)#interface 1/0/4

(Netgear Switch) (Interface 1/0/4)#service-policy in internet_access

(Netgear Switch) (Interface 1/0/4)#exit

Set the CoS queue configuration for the (presumed) egress interface 1/0/5 such that each of 
queues 1, 2, 3, and 4 gets a minimum guaranteed bandwidth of 25 percent. All queues for 
this interface use weighted round robin scheduling by default. The DiffServ inbound policy 
designates that these queues are to be used for the departmental traffic through the 
assign-queue attribute. It is presumed that the switch will forward this traffic to interface 1/0/5 
based on a normal destination address lookup for Internet traffic.

(Netgear Switch) (Config)#interface 1/0/5

(Netgear Switch) (Interface 1/0/5)#cos-queue min-bandwidth 0 25 25 25 25 0 0 0

(Netgear Switch) (Interface 1/0/5)#exit

(Netgear Switch) (Config)#exit

Enable Diffserv. 

a. Select QoS > DiffServ > Basic > DiffServ Configuration. 

A screen similar to the following displays.

b.  For Diffserv Admin Mode, select the Enable radio button.

c.  Click Apply to save the settings.