Netgear M4100-12GF (GSM7212F) - ProSAFE Gigabit L2+ Managed Switch Guía De Administador

a. Select System > SNMP > SNMP V1/V2 > Trap Flags. A screen similar to the 

following displays.

b.  For Link Up/Down, select the Enable radio button.

c.  Click Apply.

The example is shown as CLI commands and as a Web interface procedure.

Change the user password.

If you set the authentication mode to MD5, you must make the length of password longer 
than 8 characters.

(Netgear Switch) #config

(Netgear Switch) (Config)#users passwd admin

Enter old password:

Enter new password:12345678

Confirm new password:12345678

Password Changed!

change the password to “12345678”

(Netgear Switch) (Config)#users snmpv3 authentication admin md5

Set the authentication mode to md5

(Netgear Switch) (Config)#users snmpv3 encryption admin des 12345678

Set the encryption mode to des and the key is “12345678”