Netgear MBR1310 Manual De Usuario
Wireless Network Configuration
31
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Note:
If no WPS-capable client devices are located during the 2-minute
time frame, the SSID does not change, and no security is set up.
WPS PIN Entry
Any wireless computer or device that will connect to the router wirelessly is a client. The
client has to support a WPS PIN, and has to have a WPS configuration utility, such as the
NETGEAR Smart Wizard or Atheros Jumpstart.
client has to support a WPS PIN, and has to have a WPS configuration utility, such as the
NETGEAR Smart Wizard or Atheros Jumpstart.
The first time you add a WPS client, make sure that the Keep Existing Wireless Settings
check box on the WPS Settings screen is cleared. This is the default setting for the router,
and allows it to generate the SSID and WPA/WPA2 security settings when it implements
WPS. After WPS is implemented, the router automatically selects this check box so that your
SSID and wireless security settings stay the same if other WPS devices are added later.
check box on the WPS Settings screen is cleared. This is the default setting for the router,
and allows it to generate the SSID and WPA/WPA2 security settings when it implements
WPS. After WPS is implemented, the router automatically selects this check box so that your
SSID and wireless security settings stay the same if other WPS devices are added later.
To use a PIN to add a WPS client:
1.
Log in to the router as described in
2.
On the router main menu, select Add WPS
Client (computers that will connect
wirelessly to the router are clients), and
then click Next. The Add WPS Client
screen displays.
Client (computers that will connect
wirelessly to the router are clients), and
then click Next. The Add WPS Client
screen displays.
3.
Select the PIN Number radio button.
4.
Go to the client wireless computer. Run a
WPS configuration utility. Follow the utility’s
instructions to generate a PIN. Take note of the client PIN.
WPS configuration utility. Follow the utility’s
instructions to generate a PIN. Take note of the client PIN.
5.
In the router Add WPS Client screen, enter the client PIN number, and then click Next.
•
The router tries to communicate with the client for 4 minutes. If no WPS clients
connect during this time, the router wireless settings do not change.
•
The router WPS screen confirms that the client was added to the wireless network.
The router generates an SSID and implements WPA/WPA2 wireless security.
6.
Note the new SSID and WPA/WPA2 password for the wireless network. You can view these
settings in the Wireless Settings screen. See
settings in the Wireless Settings screen. See
To access the Internet from any computer connected to your router, launch an Internet
browser such as Mozilla Firefox. You should see the router’s Internet LED blink.
browser such as Mozilla Firefox. You should see the router’s Internet LED blink.
Add Wireless Computers That Do Not Support WPS
If you set up your network with WPS, and now you want to add a computer that does not
support WPS, you have to manually configure that computer. For information about how to
view the wireless settings for the router, see
support WPS, you have to manually configure that computer. For information about how to
view the wireless settings for the router, see