Netgear MBR1310 Manual De Usuario
95
A
A.
Factory Default Settings and Technical
Specifications
Factory Default Settings
You can use the Restore Factory Settings button located on the bottom of your router to reset
all settings to their factory defaults. This is called a hard reset. To perform a hard reset, press
and hold the Restore Factory Settings button for 6 seconds. Your router will return to the
factory configuration settings that are shown in the following table.
all settings to their factory defaults. This is called a hard reset. To perform a hard reset, press
and hold the Restore Factory Settings button for 6 seconds. Your router will return to the
factory configuration settings that are shown in the following table.
Feature
Default Behavior
Router
login
login
User login URL
http://www.routerlogin.net or http://www.routerlogin.com
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
connection
WAN MAC address
Use default address
WAN MTU size
1500
Port speed
AutoSense
Local
network
(LAN)
network
(LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
None
DHCP server
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
DMZ Disabled
Time zone
GMT
Daylight saving time adjustment
Disabled