Netgear PL1010 – Powerline 1000 Guía De Instalación

10

Power LED is off.

Make sure that power is supplied to the electrical 

outlet, and that the Powerline devices are not plugged 

into an extension cord, power strip, or surge protector.

Power LED is amber.

Power saving mode occurs when the Ethernet LED is 

off. This can occur in the following circumstances:
• 

The Ethernet cable is unplugged. 

• 

The device that is connected through the Ethernet 

cable is turned off.

• 

The adapter is idle for 10 minutes. 

It returns to normal mode within two seconds 

after the Ethernet link is established.

Pick A Plug LED is off.

• 

If you already set network security, make sure 

that all Powerline devices are using the same 

encryption key; for information see the online user 

manual.

• 

Press the 

Factory Reset button on each device 

for one second to return the Powerline adapter to 
its factory default settings

.