Netgear ReadySHARE USB Printer Manual De Usuario
Set Up ReadSHARE Printer
5
ReadySHARE Printer
Supported NETGEAR Routers
To determine if your NETGEAR router supports ReadySHARE Printer, see your router’s user
manual, which is available at
manual, which is available at
Install the Printer Driver and Set Up the Printer
Some USB printer manufacturers (for example, HP and Lexmark) request that you do not
connect the USB cable until the installation software prompts you to do so.
connect the USB cable until the installation software prompts you to do so.
To install the printer driver and set up the printer:
1.
Connect your computer to the router’s network.
2.
Install the USB printer driver software on each computer on your network that shares the
USB printer.
If you cannot find the printer driver, contact the printer manufacturer to find and download
the most recent printer driver software.
the most recent printer driver software.
3.
Make sure that your computer can connect to the USB printer and print.
4.
Connect the USB printer to a USB port on the router using the USB printer cable.
Download and Install the ReadySHARE Printer Utility
You must install the ReadySHARE Printer utility on each computer that will share the printer.
After you install it, the utility displays as NETGEAR USB Control Center on your computer.
Note:
The ReadySHARE Printer utility is not currently compatible with
MAC OS X El Capitan version 10.11 or later.
MAC OS X El Capitan version 10.11 or later.
To download and install the ReadySHARE Printer utility:
1.
Visit
2.
In the Downloads section, download the ReadySHARE Printer utility for either Windows or
Mac computers.
The file downloads to your computer.
3.
If necessary, unzip the ReadySHARE Printer utility setup file you downloaded.