KitchenAid 30-Inch Convection Double Wall Oven, Architect® Series II Guía De Instalación

2.   Push against the seal area of the front frame to push the 

oven into the cabinet until the back surface of the front 

frame touches the front wall of the cabinet.

3.   Push oven completely into the cabinet and center the oven 

into the cabinet cutout.
NOTE: If you have model KEBK171B, KEBK101B,  

KEBK276B, KEBK206B, KEBS179B, KEBS109B, 

KEBS277B, KEBS279B, KEBS207B, KEBS209B,  

KEBU109B or KEBU209B, proceed to Step 5.

1.   Using 2 or more people, lift the oven partially into the cabinet 

cutout. Use the oven opening as an area to grip.
NOTE: Push against seal area of the oven front frame when 

pushing the oven into the cabinet. Do not push against the 

outside edges.

5.  Securely fasten oven to cabinet using the # 8–14 x 1" screws 

provided. Insert the screws through hole in the grommet.  

Do not overtighten screws.

6.  On models with the foot positioned with the long side of 

the foot facing toward the top of the oven, the oven vent is 

taped to the side of the oven. See the following instructions 

to install.
■

 Align vent tab (B) with oven frame (A) as shown.

■

  Using one #8-18 x ³⁄

8

" screw (D) on each side of the vent 

tab (B), fasten the vent securely to the oven.

4.  Insert the grommet into the mounting rail hole using  

a flat-blade screwdriver. Insert the screwdriver into the 

grommet and turn ¹⁄

4

 turn counterclockwise. Make sure  

the grommet stays in position.