Xerox Document Workstation with PlotWorks Support & Software Guía Del Usuario
PlotWorks User Guide • The Job Editor • 4-71
Fig 4.42
The
Nesting
Options
tabbed di-
alog box
About Nesting
Only drawings in the same job and set can be nested together. This keeps different
jobs and sets separate.
jobs and sets separate.
All drawings in each nest are oriented the same way, depending on what allows
more drawings and saves media. Drawings are placed across the width of the roll
until no more fit (we call this “one stack”). Then the position of the next stack
starts just below the previous one.
more drawings and saves media. Drawings are placed across the width of the roll
until no more fit (we call this “one stack”). Then the position of the next stack
starts just below the previous one.
By default, the Job Editor will use the media entry allowing the most drawings.
This does not always use the least media, however. For instance, if three 18"x12"
drawings are printing on a 24" roll there will be an empty space of 18"x12"
because the drawings do not nest evenly.
This does not always use the least media, however. For instance, if three 18"x12"
drawings are printing on a 24" roll there will be an empty space of 18"x12"
because the drawings do not nest evenly.