Xerox 4215 MICR MRP Guía De Instalación
CONFIGURING IPDS
Table 3–1.
MAKEITDS command parameter description
Parameter
Description
/P
Pause. Instructs the program to wait for operator intervention. The pause occurs after the
conversion results display on the screen.
conversion results display on the screen.
/R
Resource Specification File. The filename may include the drive, pathname, filename, and
extension. The default drive and pathname is the current directory. The default extension is
.IRS. This parameter indicates the translation is from ASCII to binary. It is used with the
Xerox–provided .ITX files.
extension. The default drive and pathname is the current directory. The default extension is
.IRS. This parameter indicates the translation is from ASCII to binary. It is used with the
Xerox–provided .ITX files.
/O
Output Filename for the ASCII or binary output file. The filename may include the drive,
pathname, filename, and extension. The default drive and pathname is the current directory.
The default extension is .ITX for the ASCII output file and .IDA for the binary output file. If you
do not specify /O, the input filename and default extension is used.
pathname, filename, and extension. The default drive and pathname is the current directory.
The default extension is .ITX for the ASCII output file and .IDA for the binary output file. If you
do not specify /O, the input filename and default extension is used.
/L
Log Filename. The filename may include the drive, pathname, filename, and extension. The
default drive and pathname is the current directory. The default extension is .LOG. If you do
not specify this parameter, the input filename and the default extension is used.
default drive and pathname is the current directory. The default extension is .LOG. If you do
not specify this parameter, the input filename and the default extension is used.
/H
Help option. Displays brief program information about the command parameters.
Configuring your printer
The IPDS interface card is preloaded with the 4028 default font
set.
set.
N
Note: Perform the steps in this section only if you are changing
the default font set and emulation from 4028 to 3812/3816 or
you need to change any settings in the configuration file.
the default font set and emulation from 4028 to 3812/3816 or
you need to change any settings in the configuration file.
Reconfiguring your IPDS emulation consists of the following
steps, which you must perform in the order shown:
steps, which you must perform in the order shown:
•
Download the default font set
•
Download the emulation file
•
Modify, convert, and download the configuration file if
necessary.
necessary.
CAUTION: Before you begin these procedures, make sure your
computer is connected to the parallel port on the coax or twinax
interface card using the mini
computer is connected to the parallel port on the coax or twinax
interface card using the mini
–
Centronics adapter supplied with
the printer. The PC Centronics parallel cable should be no
longer than 10 feet/3 meters.
longer than 10 feet/3 meters.
N
Note: Some older PCs do not recognize the parallel port when
you turn the printer off and on. If this should occur during these
procedures, disconnect and reconnect the parallel cable from the
port.
you turn the printer off and on. If this should occur during these
procedures, disconnect and reconnect the parallel cable from the
port.
XEROX MRP FAMILY INTELLIGENT PRINTER DATA STREAM (IPDS)
3-3
CONFIGURATION AND REFERENCE GUIDE