Xerox WorkCentre 5865/5875/5890 Guía De Administador
Scanning
WorkCentre 5845/5855/5865/5875/5890 Multifunction Printer 175
System Administrator Guide
Setting Template Display Settings for the Control Panel
1. In CentreWare Internet Services, click
Properties > Services.
2. Click
Workflow Scanning > Display Settings.
3. To specify the template that appears at the top of the list, under Templates, select the template
and click
Update.
4. To prevent users from using the Default Workflow Scanning template, under Default Template
Display, select
Hide Default Template in the Templates list.
5. To require users to select a template before they press the Start button, under Template Selection,
select
User must select template before pressing Start button.
6. Click
Apply to save the new settings or Undo to retain the previous settings.
Configuring a Validation Server
Scan metadata entered at the printer control panel can be verified against a list of valid values by a
validation server.
1. In CentreWare Internet Services, click
1. In CentreWare Internet Services, click
Properties > Services.
2. Click
Workflow Scanning > Validation Servers.
3. Click
Add.
4. Select
HTTP or HTTPS.
5. Under Protocol, select the address type. Options are
IPv4, IPv6, or Host Name.
6. Type the appropriately formatted address and port number in the IP Address: Port field. The default
port number is 80 for HTTP and 443 for HTTPS.
7. In the Path field, type the path on the server.
Note:
The format for a directory path for FTP is /directory/directory, while the format for a directory
path for SMB is \directory\directory.
8. Type a Response Timeout between
5–100 seconds.
9. Click
Apply to save the new settings or Cancel to return to the previous screen.