Xerox WorkCentre 5865/5875/5890 Guía De Administador

Network Connectivity

WorkCentre 5845/5855/5865/5875/5890 Multifunction Printer

System Administrator Guide

Connecting to a Wireless Network

If the printer is connected to your wired network, you can configure wireless settings in CentreWare

Internet Services.

Note:

You cannot connect to a wired network and a wireless network at the same time.

Before you begin, purchase and install the Xerox

Wireless Network Interface.

1. In CentreWare Internet Services, click

Properties > Connectivity > Setup.

2. Next to Xerox

Wireless Network Interface, click

Edit.

Note:

The Edit button is available after you install the Xerox

Wireless Network Interface.

3. To configure IPv4, IPv6, and DNS settings, on the Wireless Profile page, next to IP, click

Edit.

Configure settings as needed, then click

Apply. The printer uses separate IP settings for wired and

wireless network connections. For details, see

on page 35.

4. On the Wireless Profile page, next to Wireless Settings, click

Edit.

5. On the Wireless Settings page, click

Scan for Available Networks. A list of detected networks

appears.

6. Next to the SSID name of the network you want to join, click

Configure and Select.

7. The printer detects the security mode that your network uses. Configure the following security mode

settings as needed:
− Under WEP Setting and Key, select the bit strength and key.
− Under Encryption Algorithm, select an encryption method.

Auto automatically detects the

algorithm that your wireless network uses.

− Under Authentication Method, select the authentication method that your wireless network

uses.

− To require the printer to validate certificates, under Server Validation, select the certificate that

you want to use. Install the validation server root certificate on the Security Certificates page

Properties > Security > Security Certificates. For details, see

Security Certificates

on page

104.

− Under Device Certificate (TLS) - Authentication Certificate, select the device certificate that

you want to use. Install the device certificate on the Security Certificates page at

Properties >

Security > Security Certificates. For details, see

Security Certificates

on page 104.

−  Under Outer Identity, configure the external User ID.
−  Under User Name, type the user name that the printer uses to access the wireless network.
−  Under Password, type and confirm a password. Click

Select to save new password as needed.

8. Click

Save.

9. Navigate back to the Setup page, then click

Properties > Connectivity > Setup.

10. Next to Xerox

Wireless Network Interface, click

Make Active.