Xerox WorkCentre 5325/5330/5335 Guía Del Usuario

Troubleshooting

WorkCentre 5300 Series Multifunction Printer
User Guide

170

Printing Takes Too Long

Printer Resets or Turns Off Frequently

Printer Is Making Unusual Noises

2-Sided Printing Problems

The printer is set to a slower printing mode (for 
example, heavyweight stock).

It takes more time to print with special media. Make sure 
that the media type is set properly in the print driver and at 
the printer control panel.

The printer is in power saving mode.

It takes time for printing to start in power saving mode.

The job is very complex.

Wait. No action needed.

The power cord is not correctly plugged into 
the outlet.

Turn off the printer, confirm that the power cord is 
correctly plugged into the printer and the outlet, 
then turn on the printer.

A system error occurred.

Contact your local Xerox representative with the fault 
information. Check the fault history. For details, see 

The tray is not installed correctly.

Open and close the tray you are printing from.

There is an obstruction or debris inside 
the printer.

Turn off the printer and remove the obstruction or debris. If 
you cannot remove it, contact your Xerox representative. 

Media or settings are not correct.

Make sure that you are using correct media. For details, 
see

on page 51. Envelopes, labels, 

gloss, and extra heavyweight stock cannot be used for 
2-Sided Printing.
In the print driver, choose 2-Sided Printing.