Xerox Phaser 6200 Prospecto
Page 3 of 3
Problem
Solution
1. Try a different Color Matching mode. From the printer's front
panel
Support Menu
select
Improve Print Quality?
, then
select
Print-Quality Tips Page
. and press OK.
Note:
The TekColor Correction set to Automatic provides the
best results for most documents.
2. If the print is too light, verify that the printer driver Print
Quality Mode or Front Panel Defaults is not set to Draft
Mode.
3. Adjust the light or darkness levels. From the front panel
Support Menu
select
Improve Print Quality?
, then select
Calibrate Colors Menu
, then selet
Print Tutorial Page
. Follow
the procedure for
Lighten/Darken Colors.
Printing Is Too Light or Too Dark
in All Colors
Transparency Print Quality
Use only Phaser
®
6200 Transparency.
Using non-Phaser
®
6200 Transparencies may cause print-
quality problems or damage the printer's Fuser.
Damage caused by using non-supported media will not be
covered under the warranty, service agreement or Total
Satisfaction Guarantee.
For a list of Transparency part numbers, refer to the printer's
Paper Tips Page
.
Possible Print Quality defects occurring on
Transparency media such as:
Light and/or Dark spots
Smeared Toner
Light Bands on print