Xerox Phaser 3140 Guía Del Usuario

Printing_ 43

printed on one page. (See "Printing multiple pages on one sheet of 

•

Layout Direction: This option allows you to select the printing 

direction on a page similar to the examples on UI.

•

Border: This option allows you to print a border around each page 

on the sheet.

•

Reverse Page Orientation: This option allows you to rotate paper 

180 degrees. 

The Graphics tab provides options for selecting Resolution. Select 

Graphics from the drop-down list under Orientation to access the 

graphic features.

•

Resolution (Quality): This option allows you to select the printing 

resolution. The higher the setting, the sharper the clarity of printed 

characters and graphics. The higher setting also may increase the 

time it takes to print a document.

•

Darkness: This option allows you to enhance printouts. The 

available options are Normal, Light, and Dark.

For Phaser 3160B and Phaser 3160N, you can adjust the 

darkness in the Printer Settings Utility.

Set Paper Type to correspond to the paper loaded in the tray from 

which you want to print. This will let you get the best quality printout. If 

you load a different type of print material, select the corresponding paper 

type.

Printer Settings tab provides Toner Save Mode, Reprint When 

Jammed, and Power Save options. Select Printer Settings from the 

drop-down list under Orientation to access the following features:

•

Toner Save Mode : Selecting this option extends the life of your 

toner cartridge and reduces your cost per page without a significant 

reduction in print quality.

-

Printer Setting: If you select this option, this feature is 

determined by the setting you’ve made from machine. 

-

On: Select this option to allow the printer to use less toner on 

each page.

-

Off: If you do not need to save toner when printing a document, 

select this option.

•

Reprint When Jammed: When this option is checked, the machine 

retains the image of a printed page until the machine signals that the 

page has successfully exited the machine. If a paper jam occurs, the 

printer will reprint the last page sent from the computer after you 

have cleared the jam. (Phaser 3140 and Phaser 3155 only)

•

Power Save: When this option is checked, the machine turns to the 

power save mode after the selected time.

For Phaser 3160B and Phaser 3160N, you change power save 

in the Printer Settings Utility.