Xerox Phaser 3610 Guía Del Usuario

Maintenance

Xerox

Phaser

3610 Black and White Printer

User Guide

Adjusting the Fuser

Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print is

smearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner is

blistered or mottled, decrease the offset for the paper you are using.

To adjust the fuser:
1. At the printer control panel, press the

Menu button.

Note:

To navigate through the menu, use the

Up or Down arrow buttons.

2. Navigate to

Admin Settings, then press OK.

3. Navigate to

Service Tools, then press OK.

4. Select

Adjust Fuser, then press OK.

5. To select the paper type for the adjustment, press the arrow buttons, then press

OK.

6. To increase or decrease the amount of offset, press the arrow buttons, then press

OK.

7. Repeat this procedure for each paper type you need to adjust.
8. To return to Service Tools, press the

Back arrow button, or to return to the main menu, press the

Menu button.

Adjusting the Density

The Density Adjustment feature controls how much toner is used to print. Adjust the density for lighter

toner use for saving toner or heavier for making prints bolder. A positive adjustment makes the prints

darker, while a negative adjustment makes the prints lighter.You can also adjust it to compensate for

different paper types and thicknesses.

To adjust the density:
1. At the printer control panel, press the

Menu button.

Note:

To navigate through the menu, use the

Up or Down arrow buttons.

2. Navigate to

Admin Settings, then press OK.

3. Navigate to

Service Tools, then press OK.

4. Select

Adjust Density, then press OK.

5. To increase or decrease the amount of offset, use the arrow buttons, then press

OK.

6. To return to the Ready screen, press the

Menu button.