Xerox Phaser 790 Guía Del Usuario

3.  Network Setup

Windows NT 4.0 print drivers

3-10

Xerox Phaser 790

8. 

Perform one of the following:

•

 

If you are installing from the CD, browse to one of the following

folders:

•

  For PostScript printing: English\Prntdrvr\PS_drvr\Win_NT4.x

folder

•

  For PCL printing: English\Prntdrvr\PCL_drvr\Win_NT4.x

folder

•

 

If you are installing from files you downloaded using the Installer

WebTool, browse to the Prntdrvr folder.

Select OK and ensure that oemsetup.inf or oemsetup is selected.

9. 

Verify the path is correct and select OK.

10.  In the Printers box, select Xerox Phaser 790 and Next.

11.  Using a maximum of 31 characters, enter a name for the printer or leave

the default name in the Printer Name box.

12.  If you want the Phaser 790 to be the default printer, select Yes; if not,

select No. Select Next.

13.  Indicate whether you want the printer installed as a shared printer. If you

select Shared, enter a Share Name for the printer (or leave the printer
default name) and make selections from the list of operating systems
used by client workstations. Select Next.

14.  Select Yes in the next dialog box to postpone printing a test page and

select Finish.

When installation is complete, the Printers window is displayed with an
icon for the newly installed printer. When you select print, your files are
transmitted over the parallel port connection to the printer.

For detailed information about setting up parallel port printing, IPX,
TCP/IP, SMB printing or setting printer options and installing additional
software, refer to 

.