Xerox Phaser 740 Prospecto

■

Plus Features (Option FP, order number Z740FP)

■

Enable the feature in the printer’s front panel

When printing multiple pages through the driver (either multiple copies of a single 
page or a multiple-page file), select Check Print to preview the first page of the job 
before proceeding with the remainder of the job; this feature is useful when printing 
a large job.

Access to Check Print from the driver is enabled and disabled in the printer’s front 
panel.  You can also set the timeout in the front panel (timeout is the amount of time 
the printer waits after sending the first page of a file before it continues with the 
remainder of the job).

The factory default for Check Print is “disabled”; the default timeout is 5 minutes.  
Follow these instructions to enable Check Print in the front panel, reset the default 
timeout, and select the option in the printer driver.

In the front panel, press  

.  Press 

 or 

 until the display reads 

.

Press 

.  Scroll to 

.

Press 

; the following message appears:

The asterisk (

) indicates the current setting.  

Scroll to 

 and press 

.

Change the timeout (the amount of time the printer pauses before 
completing the print job):

Scroll to 

. Press 

.  

Scroll the pre-set timeouts, then press 

  to activate your selection.

You can also enable Check Print and control the default timeout through 
PhaserLink Printer Management software.  For details on PhaserLink Printer 
Management software, refer to the 

PhaserShare Networking Manual on the printer’s 

CD-ROM or Tektronix web site.

Check Print:disabled *

<---  --->   OK