Xerox Phaser 540 Prospecto
B
Using SCSI Hard Disks
B-6
Phaser 540 Drivers and Utilities
6.
Select the Set SysStart Job or No SysStart Job file in the folder
on your hard disk containing decompressed utility files and
click
on your hard disk containing decompressed utility files and
click
Open.
7.
At the
Save PostScript output as:
prompt, you are asked
to supply a file name for saving printer output. Use the default
name given in the edit box or type in a new name. Then click
name given in the edit box or type in a new name. Then click
Save
to send the file to the printer.
8.
If no output is returned by the printer, the LaserWriter Utility
displays a dialog box. Click
displays a dialog box. Click
OK in the dialog box.
PC and workstation users
1.
Locate the SYSTART.PS and NOSYSTRT.PS files in the PHSR540
directory on the Tektronix Windows 3.1 Driver and Printer
Utilities diskette.
directory on the Tektronix Windows 3.1 Driver and Printer
Utilities diskette.
2.
Copy the files to your hard disk, or use the files from the diskette.
3.
Use one of the following methods to send the desired file to the
printer:
printer:
■
PC users: Use the DOS COPY command or the Copy command in
Windows
Windows
File Manager to send the file to the printer. See page 3-20
■
Workstation users: Send the file to the printer as you would any
PostScript file.
PostScript file.