Xerox Phaser 240 Guía Del Usuario
6
Troubleshooting
6-6
Phaser 240 Color Printer
To verify that your computer can communicate with the printer, use one of
these methods:
these methods:
■
If you have a Macintosh, make sure that you have the correct
driver installed and that you have selected the printer in the
Chooser
driver installed and that you have selected the printer in the
Chooser
. If the printer's name does not appear in the Chooser,
your LocalTalk or EtherTalk connection may be faulty. (See also
ÒPrinter doesn't appear in the ChooserÓ on page 6-7.)
ÒPrinter doesn't appear in the ChooserÓ on page 6-7.)
You can use the Print Desktop or Print Window commands to
send a Þle to the printer without using an application. If the
communication link between your computer and the printer is
working, the printer produces a directory listing of the active
window on the desktop.
send a Þle to the printer without using an application. If the
communication link between your computer and the printer is
working, the printer produces a directory listing of the active
window on the desktop.
■
If you have a PC, use this DOS echo command:
echo %! > port
echo showpage[ctrl-d] > port
Where [ctrl-d] indicates pressing the d key while holding down
the ctrl key. Substitute the name of the printer port (for example
LPT1:
the ctrl key. Substitute the name of the printer port (for example
LPT1:
or LPT2:) for the variable port in this command. For
example, if you are testing a parallel connection on LPT1, type:
echo %! > LPT1:
echo showpage[ctrl-d] > LPT1:
If the communication link between your computer and the printer
is working, the printer ejects a blank page. If this works, but you
cannot print from your application or through Windows, make
sure that the appropriate driver is installed and that you have
selected the printer correctly.
is working, the printer ejects a blank page. If this works, but you
cannot print from your application or through Windows, make
sure that the appropriate driver is installed and that you have
selected the printer correctly.