Xerox DigiPath Professional Production Software Support & Software Guía De Administador
X
EROX
D
IGI
P
ATH
P
RODUCTION
S
OFTWARE
A
BOUT
D
IGI
P
ATH
W
EB
S
ERVICES
D
IGI
P
ATH
4.0 W
EB
S
ERVICES
S
ERVER
A
DMINISTRATOR
G
UIDE
1-3
Powering up the hardware and starting the DigiPath WS server
1
This section contains instructions for powering up the DigiPath
WS server and hardware options.
WS server and hardware options.
It is very important you power up the hardware components in
the order presented below.
the order presented below.
1. If there is a scanner attached to the DigiPath WS server,
power up the scanner.
2. If there is a Windows printer attached to the DigiPath WS
server, power up the printer.
3. If there is a Magneto-Optical Drive (MOD) attached to the
DigiPath WS server, power up the MOD.
NOTE: If there is an optical disk in the MOD drive when the
drive is powered up, the start-up time is shorter.
drive is powered up, the start-up time is shorter.
4. If there is a RAID attached to the DigiPath WS server, power
up the RAID.
NOTE: Do not power off the RAID or if you have a UPS
attached to the RAID at any time, unless you are moving the
RAID to another DigiPath server.
attached to the RAID at any time, unless you are moving the
RAID to another DigiPath server.
5. If there is an external tape drive attached to the DigiPath WS
server, power up the tape drive.
6. Power up the monitor.
7. Power up the DigiPath WS server processor (CPU).
8. Log in to the network.
A
E
E