Xerox DigiPath Professional Production Software Support & Software Guía Del Usuario

SCAN AND PRINT

Scan and Print allows you to create a copy of any black and white or color original you 
scan. The scanner creates a temporary digital file which is used to complete the copy. This 
file is deleted when the job is submitted to the specified printer, unless you save it. You can 
choose a printer from any attached to your DigiPath workstation.

❍

Scan and Print options 
available for a job depend 
on the printer you specify 
in the Printer list box.

❍

The three-line viewing 
area at the top of the 
Scan and Print screen 
gives you information on 
scanning status (line 1), 
the number of pages 
scanned (line 2), and 
printing status and other 
information messages 
(line 3).

The Save section is 
available only when 
[Save] or [Print & 
Save] is selected in 
the Options section.

 

The Enhance Image 
section is available 
only if the Black and 
white mode was 
selected. 

In the Enhance Image 
section: Select 
[Deskew] or 
[Despeckle].

• Deskew eliminates 

the skew of an 
image.

• Despeckle removes 

stray pixels that 
appear as “dirt” on 
an image.

Open Scan and Print.

Place a hardcopy 
document on the 
scanner glass or the 
multi-sheet feeder.

Select [Print] in the 
Options section. The 
green button at the 
bottom of the screen is 
activated for Scan & 
Print.

In the Scan section:

• Original sides 

imaged: select 
[1 Sided] or [2 
Sided].

• Original page size: 

Select the size of 
your hardcopy 
document from the 
drop-down list box.

If you select 
[Custom], the 
Custom Size 
Selection dialog box 
displays. Enter the 
page size of your 
hardcopy document.

The page sizes 
available in the 
Custom Size Selection 
dialog box depend on 
the scanner attached 
to your workstation.

• Mode: Select the 

[Color] or [Black 
and white] button.

• Image Orientation: 

Select [Standard] to 
maintain the 
orientation of the 
image; Select 
[Rotated] to rotate 
the image 90 
degrees to the right.

You can select the 
Rotated option only 
once; you cannot 
rotate your image 
more than 90 degrees 
to the right.

• Reduce / Enlarge: 

Select the [Fit to 
output stock size] 
to make your 
scanned image fit a 
different stock size; 
select [Scale to] if 
you wish to change 
the size of the image 
between 38% and 
200%.

• Brightness: Select a 

number between 10 
and –10 to lighten or 
darken your image.

• Select the 

[Advanced 
Scanning…] button 
to apply DigiPath 
enhancements to 
your document.