Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guía Del Usuario
Microsoft Networking (SMB)
1. Connect to CentreWare Internet Services by using a web browser.
2. Click the Properties tab.
3. Click to the left of Connectivity and to the left of Protocols to display the items in
2. Click the Properties tab.
3. Click to the left of Connectivity and to the left of Protocols to display the items in
the folder.
4. Select a transport protocol from the Transport drop-down list.
5. Click Microsoft Networking.
6. Select a transport protocol from the Transport drop-down list.
7. Type the workgroup name in the Workgroup field.
8. Type the host name in the SMB Host Name field.
9. Set Maximum Connections. The default value is 5.
5. Click Microsoft Networking.
6. Select a transport protocol from the Transport drop-down list.
7. Type the workgroup name in the Workgroup field.
8. Type the host name in the SMB Host Name field.
9. Set Maximum Connections. The default value is 5.
10. Select the Enabled check box to enable Unicode Support.
11. Select the Enabled check box when using Automatic Master Mode.
12. Select the Enabled check box when using Password Encryption to encrypt user
11. Select the Enabled check box when using Automatic Master Mode.
12. Select the Enabled check box when using Password Encryption to encrypt user
passwords for remote authentication by using SMB.
13. To configure the primary and secondary WINS servers:
a) To allow your DHCP server to provide your WINS server address to the printer,
next to Obtain WINS Server Address Automatically, select DHCP.
b) If you want to provide the WINS server address manually, type it in the Primary
Server IP Address field and, if needed, the Secondary Server IP Address field.
14. Select Apply.
Port 9100
Raw TCP/IP is a printing method used to open a TCP socket-level connection over Port
9100, to stream a print-ready file to the printer’s input buffer. It then closes the
connection either after sensing an End of Job character in the PDL or after expiration
of a preset time-out value. Port 9100 does not require an LPR request from the computer
or the use of an LPD running on the printer. Port 9100 is selected in Windows as the
Standard TCP/IP port. This section describes how to configure the settings for Port 9100.
9100, to stream a print-ready file to the printer’s input buffer. It then closes the
connection either after sensing an End of Job character in the PDL or after expiration
of a preset time-out value. Port 9100 does not require an LPR request from the computer
or the use of an LPD running on the printer. Port 9100 is selected in Windows as the
Standard TCP/IP port. This section describes how to configure the settings for Port 9100.
Note
Enable the Port 9100 port when using HP-UX.
1. Connect to CentreWare Internet Services by using a web browser.
2. Click the Properties tab.
3. Click to the left of Connectivity and to the left of Protocols to display the items in
2. Click the Properties tab.
3. Click to the left of Connectivity and to the left of Protocols to display the items in
the folder.
4. Click Port 9100.
5. Next to TCP-MSS Mode, select Enabled if needed.
5. Next to TCP-MSS Mode, select Enabled if needed.
TCP-MSS settings are common for LPD and Port 9100.
6. If TCP-MSS mode is enabled, under IPv4, type the IP addresses for Subnet 1, 2 and
3.
7. Ensure that the TCP Port Number is set to 9100.
6-17
Xerox
®
Versant
®
80 Press
System Administration Guide
Using CentreWare Internet Services Settings