Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guía Del Usuario
Recommended Solution
Possible Cause
Fault Code
Fault Area
1.
Fan the paper to eliminate pa-
per adhesion (especially in high
humidity or high temperature
environments).
per adhesion (especially in high
humidity or high temperature
environments).
2.
Clean the Bypass Tray feed, re-
tard, and nudger rolls with a
damp cloth.
tard, and nudger rolls with a
damp cloth.
3.
Replace feed rolls (feed, retard,
nudger); refer to
nudger); refer to
4.
If problem persists, Call for ser-
vice.
vice.
Repetitive misfeeds or
multifeeds
multifeeds
178-120, 078-
125, 078-126,
078-127
125, 078-126,
078-127
Bypass (Tray
5)
5)
Perform the following in this order:
1.
Remove or clear any jammed
paper.
paper.
2.
Replace and fan the paper in
tray.
tray.
3.
Replace the OHCF Feed Rolls;
refer to
refer to
.
Pre-registration sensor
jam; during paper
transportation, feed
sensor is not turned on
within period of time
paper is transporting
from tray
jam; during paper
transportation, feed
sensor is not turned on
within period of time
paper is transporting
from tray
178-100, 178-
101
101
Tray 8
178-103
Trays 5 (By-
pass), 8, and
9
pass), 8, and
9
1.
Fan the paper to eliminate pa-
per adhesion (especially in high
humidity or high temperature
environments).
per adhesion (especially in high
humidity or high temperature
environments).
2.
Check the position of Skew Ad-
justment Levers. The levers
should be retracted.; refer to
justment Levers. The levers
should be retracted.; refer to
.
3.
Replace the tray feed rolls (feed,
retard, nudger); refer to
retard, nudger); refer to
4.
If problem persists, Call for ser-
vice.
vice.
Repetitive misfeeds or
multifeeds
multifeeds
078-125, 078-
126, 078-127,
178-106, 178-
156
126, 078-127,
178-106, 178-
156
Trays 8 and 9
14-23
Xerox
®
Versant
®
80 Press
User Guide
Press Problem Solving