Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guía Del Usuario
The width is measured from the lead edge to the trail edge of the envelope. For
example, if you are loading SEF, enter the long dimension of the envelope as the
width. If you are loading the envelope LEF, enter the short dimension of the envelope
as the width.
example, if you are loading SEF, enter the long dimension of the envelope as the
width. If you are loading the envelope LEF, enter the short dimension of the envelope
as the width.
4. Enter a heavy paper weight value, such as 220 gsm, in the Paper Weight field.
5. Select the Bypass Tray as the Paper Source.
6. Store unused envelopes in their original packaging to avoid the excess moisture or
5. Select the Bypass Tray as the Paper Source.
6. Store unused envelopes in their original packaging to avoid the excess moisture or
dryness that can affect print quality and cause wrinkling. Excessive moisture can
cause the envelopes to seal before or during printing.
cause the envelopes to seal before or during printing.
Some wrinkling or embossing may occur when printing on envelopes. Successful envelope
printing depends on the quality and construction of the envelopes. Try another envelope
brand if problems occur.
printing depends on the quality and construction of the envelopes. Try another envelope
brand if problems occur.
Loading Paper in the 1-Tray High Capacity
Feeder (HCF / Tray 6)
Feeder (HCF / Tray 6)
Tips about the 1-tray HCF (Tray 6):
• This tray accommodates only 8.5 x 11 in./A4 Long Edge Feed (LEF) stock
• Stock weights between 18 lb./64gsm bond to 80 lb./220 gsm cover may be used in
• Stock weights between 18 lb./64gsm bond to 80 lb./220 gsm cover may be used in
this tray
• It holds a maximum of 2000 sheets of 20lb./75 gsm paper
• Stock must be loaded only in LEF direction
• Do not load materials above the MAX line
• Stock must be loaded only in LEF direction
• Do not load materials above the MAX line
1. Select the appropriate paper stock for your job.
2. Pull out the tray slowly until it stops.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Load the paper in the tray.
4. Fan the sheets before loading them into the tray.
5. Load the paper in the tray.
a) Align the edge of the paper against the RIGHT edge of the tray.
b) Move the paper guides to just touch the edges of the paper stack.
b) Move the paper guides to just touch the edges of the paper stack.
Do not load materials above the MAX line.
Xerox
®
Versant
®
80 Press
3-8
User Guide
Paper and Media