Craftsman 3030gSC Manual De Usuario
About the Code Reader
ADJUSTMENTS AT FIRST USE
47156 5
ADJUSTMENTS AT FIRST USE
The first time the Code Reader is connected to a vehicle, you must
select the desired display language (English, French or Spanish) and
unit of measurement (Standard or metric) as follows:
select the desired display language (English, French or Spanish) and
unit of measurement (Standard or metric) as follows:
1.
Connect the Code Reader’s cable
connector to the vehicle’s DLC.
The Select Language screen dis-
plays.
plays.
2.
Use the DOWN
button, as neces-
sary, to highlight the desired display
language.
language.
3.
When the desired display language is
selected, press the ENTER
button to
confirm your selection.
The Select Unit screen displays.
4.
Use the DOWN
button, as necessa-
ry, to highlight the desired unit of mea-
surement.
surement.
5.
When the desired unit of measurement
is selected, press the ENTER
button
to confirm your selection.
The Code Reader’s Firmware Ver-
sion screen displays.
sion screen displays.
After the initial language and unit of measurement selections
are performed, these, as well as other settings, can be
changed as desired. Proceed to “ADJUSTMENTS AND
SETTINGS” on page 48 for further instructions.
are performed, these, as well as other settings, can be
changed as desired. Proceed to “ADJUSTMENTS AND
SETTINGS” on page 48 for further instructions.