Craftsman 74580 Manual De Usuario

16 ― English

   

When servicing, use only 

identical replacement parts. Use of any other 

parts may create a hazard or cause product 

damage.

   

Do not at any time let 

brake fluids, gasoline, petroleum-based 

products, penetrating oils, etc., come in 

contact with plastic parts. Chemicals can 

damage, weaken or destroy plastic which can 

result in serious personal injury.

   

Always wear eye 

protection with side shields marked to 

comply with ANSI Z87.1, along with hearing 

protection. Failure to do so could result in 

objects being thrown into your eyes, resulting 

in possible serious injury.

   

To avoid serious personal 

injury, always remove the battery pack from 

the tool when cleaning or performing any 

maintenance.

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic 

parts. Most plastics are susceptible to 

damage from various types of commercial 

solvents and may be damaged by their use. 

Use clean cloths to remove dirt, dust, oil, 

grease, etc. 

BATTERY PACK
■ Store the battery pack fully charged.
■ Recharge the battery pack whenever 

there is a noticeable reduction in trimmer 

performance. Do not allow the battery pack to 

become completely discharged.
■ Do not recharge a battery pack that is 

already fully charged. Overcharging shortens 

battery life.

■ Once the battery pack is fully charged, 

remove the battery from the charger and 

disconnect the charger from the outlet.
■ Do not store the battery pack on the tool or 

in the charger.
■ Recharge the battery at a temperature 

between 23

o

F and 122

o

F. If the battery pack 

is hot, allow it to cool down before recharging.

CHARGER MAINTENANCE
■ Keep the charger clean and clear of debris. 

Do not allow foreign material to get into the 

recessed cavity or onto the contacts. Wipe 

the charger clean with a dry cloth. Do not 

use solvents or water, and do not place the 

charger in wet conditions.
■ Unplug the charger when there is no 

battery pack in it.
■ Store the charger at normal room 

temperature. Do not store it in excessive 

heat. Do not use the charger in direct 

sunlight. 

CLEANING
Remove The Battery Pack.
■ Brush or blow dust and debris out of the air 

vents using compressed air or a vacuum.
■ Keep the air vents free of obstructions, 

sawdust, and wood chips. Do not spray, 

wash, or immerse the air vents in water.
■ Wipe off the housing and the plastic 

components using a moist, soft cloth.
■ Do not use strong solvents or detergents 

on the plastic housing or plastic components. 

Certain household cleaners may cause 

damage, and may cause a shock hazard.