Craftsman SM2509RC Manual De Usuario

6

7

6

7

12. 

PROTECTION. Any power 

tool can throw foreign 

objects into the eyes and could 

cause permanent eye damage. 

ALWAYS wear Safety Goggles (not 

glasses) that comply with ANSI 

Safety standard Z87.1. Everyday 

eyeglasses have only impact–

resistant lenses. They 

ARE NOT 

safety glasses. Safety Goggles are 

available at Sears. 

NOTE: Glasses 

or goggles not in compliance with 

ANSI Z87.1 could seriously injure 

you when they break.

13. 

OR DUST MASK. Sawing 

operation produces dust.

14.           

SECURE WORK. Use 

clamps or a vice to hold 

work when practical. It is 

safer than using your hand and 

 

it frees both hands to operate 

 

the tool.

15. 

POWER SOURCE before servicing, 

and when changing accessories 

such as blades, bits and cutters.

16. 

UNINTENTIONAL STARTING. 

Make sure switch is in the OFF 

position before plugging the tool in.

17. 

ACCESSORIES. Consult 

this Operator’s Manual for 

recommended accessories. 

 

The use of improper accessories 

 

may cause risk of injury to yourself 

or others.

18. 

NEVER STAND ON THE TOOL. 

Serious injury could occur if the 

tool is tipped or if the cutting tool is 

unintentionally contacted.

19. 

CHECK FOR DAMAGED PARTS. 

Before further use of the tool, a 

guard or other part that is damaged 

should be carefully checked to 

determine that it will operate 

properly and perform its intended 

function – check for alignment of 

moving parts, binding of moving 

parts, breakage of parts, mounting 

and any other conditions that may 

affect its operation. A guard or 

other part that is damaged should 

be properly repaired or replaced.

20. 

THE POWER “OFF”. Do not walk 

away from a running tool until the 

blade comes to a complete stop 

and the tool is unplugged from the 

power source.

21. 

DO NOT OVERREACH. Keep 

proper footing and balance at all 

times. NEVER reach across the 

path of the cutting blade while tool 

is in operation.