Craftsman CBMS2500 Manual De Usuario

 •   Hot items, such as recently used grills, blowtorches,  
  etc., must not be stored in the shed.

•   Heavy articles should not be leaned against the  
  walls, as this may cause panel distortion and  
  permanent damage.
 
•   Keep roof clean of snow and leaves.
 
•    Your product is made of materials that will withstand 

outdoor use. Exposure to the elements (such as 
dust, plant and animal life, moisture and sunlight) 
encourages moss, algae, and mold to grow on 
outdoor items. To maintain the look of your product, 
we recommend cleaning it each year with mild 
soap and water. DO NOT use bleach, ammonia, or 
other caustic cleaners, and DO NOT use stiff bristle 
brushes. Failure to perform annual cleaning could 
result in permanent staining of the plastic. This is 
not a manufacturing defect and is not covered under 
warranty.

•    Complete site preparation and foundation  

  construction before unpacking parts and  
  beginning assembly.

•   DO NOT attempt to assemble on a day with strong  
 winds.
 
•   DO NOT attempt to assemble on days when  
  temperature is below 32 degrees.
 
•    Set aside appropriate amount of time to completely  

  assemble shed. 

 
•   Make sure you have assistance nearby to lift and  
  secure parts in place. 
 
•   Wear light duty work gloves while assembling shed.
 
•    Once roof is assembled, a flashlight may be of use  

  when assembling smaller components inside shed.

 
•   DO NOT use a torque wrench or hand drill to  
  tighten provided Easy bolts. Use 010210410 Easy  
  Bolt Easy Driver tool (provided) ONLY.
 
•    Extra hardware is provided for small fasteners for  

  customer convenience. In some cases, there will be  
  extra small fasteners once the assembly is complete.

Note: This product contains parts that are used in  
different orientations to construct the shed. Please take 
note of the orientation of the parts shown throughout 
this instruction manual. Failure to follow instructions 
could result in damage to parts. Manufacturer is not  
responsible for replacing parts lost or damaged due  
to incorrect assembly.

To purchase replacement parts call.