Craftsman 3130eSC Manual De Usuario

 

 

 

 

 

®

 

 ENTER button - When in MENU mode, confirms the selected 

option or value. 

 DOWN button - When in MENU mode, scrolls DOWN through 

the menu and submenu selection options. When LINKED to a 
vehicle, scrolls DOWN through the current display screen to display 
any additional data. 

 GREEN LED - Indicates that all engine systems are running 

normally (all Monitors on the vehicle are active and performing their 
diagnostic testing, and no DTCs are present). 

 YELLOW LED - Indicates there is a possible problem. A “Pending” 

DTC is present and/or some of the vehicle’s emission monitors have 
not run their diagnostic testing. 

 RED LED - Indicates there is a problem in one or more of the 

vehicle’s systems. The red LED is also used to show that DTC(s) 
are present. DTCs are shown on the Scan Tool’s display. In this 
case, the Malfunction Indicator (“Check Engine”) lamp on the 
vehicle’s instrument panel will light steady on. 

 Display - Color LCD display shows menu and submenus, test 

results, Scan Tool functions and Monitor status information. See 
DISPLAY FUNCTIONS (page 9) for more details. 

 CABLE - Connects the Scan Tool to the vehicle’s Data Link 

Connector (DLC). 

 CHRYSLER Connector Cable Adaptor - Installs on cable (item 14) 

when connecting to a Chrysler OBD1 Data Link Connector. 

 FORD Connector Cable Adaptor - Installs on cable (item 14) when 

connecting to a Ford OBD1 Data Link Connector. 

 GM Connector Cable Adaptor - Installs on cable (item 14) when 

connecting to a GM OBD1 Data Link Connector. 

 HONDA Connector Cable Adaptor - Installs on cable (item 14) 

when connecting to a Honda OBD1 Data Link Connector. 

 OBD II Cable - Connects the scan tool to the vehicle's Data Link 

Connector (DLC) when retrieving codes from OBD II systems. 

 TOYOTA Connector Cable Adaptor - Installs on cable (item 14) 

when connecting to a Toyota OBD1 Data Link Connector.