Craftsman 3130eSC Manual De Usuario
Honda OBD1 Systems
DIAGNOSTIC TROUBLE CODES (DTCs) - CODE RETRIEVAL PROCEDURE
102 FixAssist
®
Retrieving and using Diagnostic Trouble Codes (DTCs) for
troubleshooting vehicle operation is only one part of an
overall diagnostic strategy.
DIAGNOSTIC TROUBLE CODES (DTC's)
"Diagnostic Trouble Codes" (DTC's) are used to identify systems or
components that are malfunctioning.
components that are malfunctioning.
CODE RETRIEVAL PROCEDURE
Never replace a part based only on the DTC definition.
Each DTC has a set of testing procedures, instructions and
flow charts that must be followed to confirm the location
of the problem. This information is found in the vehicle's
service manual. Always refer to the vehicle's service manual
for detailed testing instructions.
Each DTC has a set of testing procedures, instructions and
flow charts that must be followed to confirm the location
of the problem. This information is found in the vehicle's
service manual. Always refer to the vehicle's service manual
for detailed testing instructions.
Check your vehicle thoroughly before performing
any test. See BEFORE YOU BEGIN on page 31 for
details.
ALWAYS observe safety precautions whenever working on a
vehicle. See Safety Precautions on page 3 for more information.
any test. See BEFORE YOU BEGIN on page 31 for
details.
ALWAYS observe safety precautions whenever working on a
vehicle. See Safety Precautions on page 3 for more information.
1.
Locate the vehicle's Data Link Connector (DLC). See DATA LINK
CONNECTOR (DLC) on page 101 for connector location.
Some DLCs have a plastic cover that must be removed before
connecting the Scan Tool's cable connector.
connecting the Scan Tool's cable connector.
2.
Connect the Scan Tool cable (with the
Honda Connector Cable Adaptor at-
tached) to the Scan Tool, then connect
the adaptor to the vehicle’s DLC. Press
the POWER/LINK
tached) to the Scan Tool, then connect
the adaptor to the vehicle’s DLC. Press
the POWER/LINK
button to turn
the Scan Tool ON, then press the
ENTER
ENTER
button to continue.
The Honda Menu displays.
Use the
button to make
menu selections.
Turn the Ignition key "ON."
Make sure the throttle is fully closed.
Make sure the emergency brake is
applied.
applied.
Place the transmission in neutral.
Turn all vehicle accessories "OFF."