Craftsman 3130eSC Manual De Usuario
![Craftsman](https://files.manualsbrain.com/attachments/64d6cde975b4a3b8237659498f8efc460daae72a/common/fit/150/50/86e49e5c9c65cca0b47572681506b669ff7da60b30985782de01b2359a72/brand_logo.png)
Additional Tests
BATTERY/ALTERNATOR MONITOR
FixAssist
®
133
2.
With the scan tool on the Code
Retrieval screen, press and release the
M button.
M button.
The Main Menu displays.
3.
Use the UP
and DOWN
buttons,
as necessary, to highlight Battery/
Alternator Monitor, then press the
ENTER
Alternator Monitor, then press the
ENTER
button.
The Battery/Alternator Monitor Menu
displays.
displays.
4.
Use the UP
and DOWN
buttons,
as necessary, to highlight Alternator
Monitor, then press the ENTER
Monitor, then press the ENTER
button.
An instructional screen displays.
5.
Warm the engine to normal operating
temperature. Turn on the headlights.
Press the ENTER
Press the ENTER
button to continue.
An instructional screen displays.
6.
Press the accelerator pedal to raise
engine speed to 2000 RPM, and
maintain the engine speed.
maintain the engine speed.
When engine speed is within the
required range, the alternator test
begins. A progress screen shows
the Engine RPM and countdown
(time remaining until the test is
complete).
required range, the alternator test
begins. A progress screen shows
the Engine RPM and countdown
(time remaining until the test is
complete).
7.
When the alternator check is complete,
a results screen indicates whether or
not the charging system is within
acceptable limits. The System Status
LEDs provide a PASS/FAIL indication,
as follows:
not the charging system is within
acceptable limits. The System Status
LEDs provide a PASS/FAIL indication,
as follows:
Green = PASS
Yellow = Caution/LOW
Red = FAIL
If the alternator voltage is less than 9 V, the red, yellow and
green SYSTEM STATUS LEDs will flash on and off.
green SYSTEM STATUS LEDs will flash on and off.
8.
Press the M button to return to the Main Menu.