Craftsman 3130eSC Manual De Usuario
Using the Diagnostic Tool
VIEWING ABS DTCs
50 FixAssist
®
If the definition for the
currently displayed code is
not available, an advisory
message shows on the
Scan Tool’s LCD display.
currently displayed code is
not available, an advisory
message shows on the
Scan Tool’s LCD display.
I/M MONITOR STATUS
icons are not displayed
when viewing enhanced
DTCs.
icons are not displayed
when viewing enhanced
DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the
and
buttons, as necessary, to view the
additional information.
The Scan Tool will display a code only
if codes are present in the vehicle’s
computer memory. If no codes are
present, a “No Enhanced DTC’s are
presently stored in the vehicle’s
computer” is displayed. Press the M
button to return to the Main Menu.
if codes are present in the vehicle’s
computer memory. If no codes are
present, a “No Enhanced DTC’s are
presently stored in the vehicle’s
computer” is displayed. Press the M
button to return to the Main Menu.
3.
If more than one code was retrieved press the DTC/FF button, as
necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Scan Tool’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press the
POWER/LINK
the Scan Tool’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press the
POWER/LINK
button again.
4.
When the last retrieved DTC has been displayed and the DTC/FF
button is pressed, the Scan Tool returns to the “Priority” Code.
To exit the enhanced mode, press the SYSTEM MENU
button to return to the System menu. Use the UP
and DOWN
buttons, as necessary, to highlight Global OBD, then press
the ENTER
button to return to the Global OBD2 mode.
VIEWING ABS DTCs
Refer to Vehicle Applications - ABS on page 149 for vehicle
makes covered.
makes covered.
Reading ABS DTCs
1.
When ABS is chosen from the System
Menu, a "One moment please"
message displays while the Scan Tool
retrieves the selected DTCs.
message displays while the Scan Tool
retrieves the selected DTCs.