Craftsman CLHT2422S-N Manual De Usuario

15 ― English

   

Do not at any time let 

brake fluids, gasoline, petroleum-based 

products, penetrating oils, etc., come in 

contact with plastic parts. Chemicals can 

damage, weaken or destroy plastic which 

may result in serious personal injury.

   

When servicing, use only 

identical replacement parts. Use of any other 

parts may create a hazard or cause product 

damage.

 

  

Always wear eye 

protection with side shields marked to 

comply with ANSI Z87.1, along with hearing 

protection. Failure to do so could result in 

objects being thrown into your eyes resulting 

in possible serious injuries.

   

To avoid serious personal 

injury, always remove the battery pack from 

the tool when cleaning or performing any 

maintenance.

   

Wear safety gloves when 

working on the cutting device and close to it! 

Use appropriate tools to remove debris e.g. a 

brush or wooden stick! Never use your bare 

hands!

GENERAL MAINTENANCE
Before each use, inspect the entire product 

for damaged, missing, or loose parts such 

as screws, nuts, bolts, caps, etc. Tighten 

securely all fasteners and caps and do 

not operate this product until all missing or 

damaged parts are replaced. Please contact 

a qualified service center for assistance. 
Avoid using solvents when cleaning plastic 

parts. Most plastics are susceptible to 

damage from various types of commercial 

solvents and may be damaged by their use. 

Use clean cloths to remove dirt, dust, oil, 

grease, etc.

CLEANING THE BLADE
■ Keep the cutting blades clean and free of 

debris.
NOTE: Remove battery before performing 

any maintenance.
■ Use a brush or high pressure air (max.  

3 bar) to remove debris from the blades.
■ With gloves on, clean the blades with a dry 

cloth to remove loose material.
■ Apply a small amount of light machine oil 

to the edge of the top blade to retain good 

cutting performance. See Lubricating The 

Blade.
■ Keep the cutting blades sharp. Have 

heavily worn or damaged blades replaced 

with identical parts by a qualified service 

dealer.
■ Adjustment of the distance between blades 

is not necessary, as this is predetermined by 

the manufacturer.

BATTERY PACK
■ Store the battery pack fully charged.
■ Recharge the battery pack whenever there 

is a noticeable reduction in the performance. 

Do not allow the battery pack to become 

completely discharged.
■ Do not recharge a battery pack that is 

already fully charged. Overcharging shortens 

battery life.
■ Once the battery pack is fully charged, 

remove the battery from the charger and 

disconnect the charger from the outlet.
■ Do not store the battery pack on the tool or 

in the charger.
■ Recharge the battery at a temperature 

between 23

o

F and 122

o

F. If the battery pack 

is hot, allow it to cool down before recharging.