Craftsman 11586 Manual De Usuario

8 - English

WARNING: 

Do not allow familiarity with products to 

make you careless. Remember that a careless 

fraction of a second is sufficient to inflict serious 

injury.

WARNING: 

Always wear eye protection with side 

shields marked to comply with ANSI Z87.1. Failure to 

do so could result in objects being thrown into your 

eyes, resulting in possible serious injury.

 Do not use any attachments or acces-

sories not recommended by the manufacturer of this 

product. The use of attachments or accessories not 

recommended can result in serious personal injury.

: The handheld inflator is capable of 

inflating to 200 psi

, 13.7 BAR, or 14 kg/cm

2 

max. To 

avoid over inflation, carefully follow instructions on 

items to be inflated. Never exceed recommended 

pressures. Use only recommended air handling parts 

acceptable for pressures not less than 200 psi.

: Do not leave items to be inflated  

unattended while handheld inflator is in use. These 

items can burst and could cause serious injury.

: The handheld inflator is not designed to 

inflate large volume items such as boats, pools, rafts, 

large air beds, etc. It is also not designed for com-

mercial application.

: Since the pressure display is not cali-

brated, and is therefore not binding for exact values, 

tire pressure must be checked using a calibrated 

measuring device before driving a vehicle with ve-

hicle tires inflated with the handheld inflator. 

: Risk of injury-do not direct air stream at 

body.

: Hot surface-to reduce risk of burns do 

not touch metal clamps of hose assembly. 

You may use this tool for the purposes listed below:
 

Inflating sports balls, tires, floats, and toys

For complete charging instructions, refer to the Operator’s 

Manual for the battery packs and chargers listed in the 

General Safety Rules.

Craftsman

®

 19.2 V lithium-ion battery packs are designed 

with features that protect the lithium-ion cells and 
maximize battery life. 

If the product stops during use, release the trigger to reset 
and resume operation. If the product still does not work, 
the battery needs to be recharged.

.

 

Place battery pack in the handheld inflator. Align raised rib 
on battery pack with groove inside handheld inflator.

When placing battery pack in the 

product, be sure raised rib on battery pack 
aligns with groove inside handheld inflator and 
latches snap into place properly. Improper as-
sembly of battery pack can cause damage to 
internal components.



  Make sure the latches on each side of the battery pack 

snap in place and battery pack is secured in product 
before beginning operation.

 Always remove battery pack from the 

product when you are assembling parts, making 
adjustments, cleaning, or when not in use. Remov-
ing battery pack will prevent accidental starting that 
could cause serious personal injury.



  Locate the latches on the side of the battery pack and 

depress to release the battery pack from handheld inflator.



  Remove battery pack.

: Improperly attached hoses or adaptors 

can become detached under pressure and cause 
serious injury. Possible air leaks can cause faulty 
pressure readings. Make sure all connections are 

tightly secured.



  Remove battery pack.

 

Loosen knob slightly by turning counterclockwise.



  Insert the end of the air hose into the open end of the 

product.

 

Push air hose inward until it stops. 

 

Tighten knob by turning clockwise.

 

To remove, turn knob counterclockwise and remove air 

hose.