Craftsman SM2511RC Manual De Usuario

34

35

●   Remove adjusting wrench from the 

tool before turning it on.

●  To avoid injury from jams, slips, 

or thrown pieces, use only 

recommended accessories.

●  Check the dust bag before you 

work. Empty the bag if it is more 

than half-full. 

●  Consult the ACCESSORIES and 

ATTACHMENTS section of this 

Operator’s Manual for recommended 

accessories. Follow the instructions 

that come with the accessory. The 

use of improper accessories may 

cause risk of injury to persons.

●  Choose the correct 10 in. diameter 

blade for the material and the type 

of cutting you plan to do. 

●  Make sure the blade is sharp, 

undamaged and properly aligned. 

With the saw unplugged, push 

the cutting arm all the way down. 

Manually spin the blade and check 

for clearance. Tilt the power-head to 

a 45° bevel and repeat the test.

●  Make sure the blade and arbor 

collars are clean.

●  Make sure all clamps and locks are 

tight and there is no excessive play 

in any parts. 

Cluttered areas and benches invite 

accidents. 



!

●  Plan ahead to protect your eyes, 

hands, face and ears.

●  Know your miter saw. Read and 

understand this Operator’s Manual 

and labels affixed to this tool. Learn 

its application and limitations as well 

as the specific potential hazards 

peculiar to this tool. To avoid injury 

from accidental contact with moving 

parts, do not do layout, assembly, or 

setup work on the miter saw while 

any parts are moving.

●  Avoid accidental starting, make sure 

the trigger switch is disengaged 

before plugging the miter saw into a 

power outlet. 

●  Use the right tool. Don’t force a tool 

or attachment to do a job it was not 

designed to do. Use a different tool 

for any workpiece that can’t be held 

in a solidly braced, fixed position.



!