Craftsman 34120 Manual De Usuario

OPERATION

1. Insert extension cord socket into Chain Saw’s Plug

(Fig. 7a).

2. An Extension Cord Retainer is attached to the Handle to reduce strain on the cord.

To use this feature, simply double the extension cord as shown, about a foot from

the end, and insert it into the end of the Retainer. Place the loop formed by

doubling the cord over the Hook

(Fig. 7b). Gently tug on the cord to ensure that it

is firmly situated in the Retainer

(Fig. 7c).

3. Keep extension cord clear of operator, unit and any obstacles at all times.

Do not expose the cord to heat, oil, water, or sharp edges.

ATTACHING EXTENSION CORD

Fig. 7a

Cord locked in Extension Cord Retainer

Completed

Fig. 7c

Fig. 7b

WARNING

Check the voltage and electric current supply: The voltage

and current supply must comply with the ratings on the data plate.

SWITCHING ON AND OFF (Fig. 8)

OPERATION cont.

1. To switch the Chain Saw ON, press the

lock-off button, then fully press the on/off

switch (2) and hold in this position.

The lock-off button (3) can now be released.
2. To switch the Chain Saw OFF, release the

on/off

switch (2). Do not stop chain saw after sawing

by activating the front hand guard

(manual chain brake).

Lock-off (3)

Fig. 8

Fig. 9

On/Off switch (2)

THE CHAIN BREAK

(

Built-In, Manual and Automatic and Systems) (Figs. 8 and 9)

The MANUAL chain brake is a safety mechanism activated through the front

hand guard (6) when kickback occurs. Chain stops immediately.
The following function check should be carried out at regular intervals.
1.

MANUAL CHAIN BRAKE (See Fig. 9): PUSH front hand guard (6) forward (position 2 )

and try starting the chain saw.

The chain must not start. To deactivate the kickback brake,

pull hand guard (6) backwards (position 1), and release On/Off (trigger) switch (2),

(See Fig. 8 for On/Off switch location).

Pos. 1

6 Hand Guard

Pos. 2

(trigger)

AUTOMATIC CHAIN BRAKE: RELEASE the On/Off (trigger) switch to activate

chain brake

AUTOMATICALLY, (See Fig. 8 for On/Off switch location).