Craftsman 34120 Manual De Usuario

Your Chain Saw has a precision built electric motor and it should only be connected 

to a 

120-volt, 60 Hz AC ONLY power supply (normal household current). The electric

Chain Saw should always be used with a GFCI (Ground Fault Circuit Interrupter) outlet.
DO NOT operate this Chain Saw on direct current (DC). The large voltage drop would cause 

a loss of power and the motor would overheat.
If the Chain Saw does not operate when plugged into correct 120-volt, 60 Hz AC ONLY outlet, 

check the power supply. The Chain Saw comes with an electric plug and should be plugged

into a proper extension cord 

  1. Rear handle (See Fig. 2)

  2. On/Off switch (See Fig. 2)

  3. Lock-off button (See Fig. 2)

  4. Oil filler cap (See Fig. 2)

  5. Front handle (See Fig. 2)

  6. Activation lever for kickback brake (front Hand Guard) (See Fig. 2)

  7. Chain Guide bar (See Fig. 2)

  8. Chain (See Fig. 2)

  9. Spiked bumper (See Fig. 2)

10. Plastic Chain/Bar/Blade protection cover (See Fig. 2)

11. Locking knob/ Chain tensioning adjustment knob (See Fig. 2)

12. Cover plate (See Fig. 2)
13. Drive sprocket (See Fig. 3)

14. Guide fins for chain bar (See Fig. 3)

15. Symbol for rotation and cutting direction (See Fig. 3)

16. Chain tensioning catch (See Fig. 3)

17. Chain catcher (See Fig. 3)

18. Fastening bolt (See Fig. 3)

19. Oil level gauge (See Fig. 3)

  • Voltage: 120V  
  • Rated power: 4.0 HP, 15 Amp
  • Bar length: 18”
  • Chain speed: 12m/s
  • Oil tank capacity: 200ml
  • Chain pitch: 3/8”
  • Number of chain links: 63
  • Chain gauge: 0.05”
  • Saw chain type: Oregon

®

, 18” (91PX063X)

    

Extra chain: E&S, ES91VS63E

  • Bar type: Oregon

®

, 18” (180SDEA041)

: 10.5 lbs

  • Protection class:       / II