Black & Decker 3-in-1 Food Processor Manual De Instrucciónes
6
7
En
GL
iSH
PROBLEM
POSSiBLE CAUSE
SOLUTiOn
Food is unevenly
chopped.
Workbowl is
overfilled. You may
be running the
bowl continuously
instead of on PUlSe.
Food may be cut in
random sizes.
Smaller amounts will
process more evenly.
Use the PUlSe button
in 5-second or less
increments. Allow the
blades to stop completely
before pressing the
PUlSe button again.
Cut food in same size
pieces before placing in
processor.
liquid leaks from the
bottom of the workbowl.
Too much liquid in
the workbowl.
When processing liquids,
do not add more than
3 cups to workbowl.
do not remove the
blade before removing
workbowl from processor
when processing liquids.
Sliced foods are uneven
and slanted.
The feed chute has
not been well packed
or uneven pressure
has been applied
to the food pusher
during processing.
Cut pieces in even
lengths, just a little
shorter than the length
of the feed chute. Pack
the chute carefully and
maintain even pressure
on the food pusher as the
food is being processed.
Herbs or bread are
sticking to sides of
blender and not getting
chopped.
Blender jar, food
to be chopped and
blade are not dry.
Always make sure that
the workbowl , the
blade and the food to be
chopped are dry.
Some pieces of food
remain on top of the
slice/shred disc.
This is normal.
Slice or shred those
pieces by hand or save for
another use, like soups
that will be pureed.
TROUBLESHOOTinG FOR FOOD PROCESSORS
PROBLEM
POSSiBLE CAUSE
SOLUTiOn
Soft cheese collects on
top of the slice/shred
disc.
The cheese was not
cold enough. The
pressure exerted on
the pusher was too
great.
Be sure soft cheeses
are well chilled or place
in freezer until knife
inserted into cheese
penetrates about ½-inch.
Remember food pusher
is to be used as a guide;
never exert hard pressure
on the food pusher.