George Foreman Indoor/Outdoor Grill Manual De Instrucciónes
4
GETTING STARTED
• Remove all packing material, any stickers, and the plastic band around the power plug.
• Remove and save literature.
• Please visit www.prodprotect.com/applica to register your warranty.
• Wash grill plate, drip tray and lid with warm, soapy water. Wipe dry.
Important: Do not immerse temperature control probe in water or any other liquid.
• Remove and save literature.
• Please visit www.prodprotect.com/applica to register your warranty.
• Wash grill plate, drip tray and lid with warm, soapy water. Wipe dry.
Important: Do not immerse temperature control probe in water or any other liquid.
To clean, wipe with a damp cloth and dry thoroughly.
HOW TO USE
This product is for household use only.
ASSEMBLY INSTRUCTIONS
1. Assemble pedestal tube by connecting two halves of tube. Insert the tapered end
of the Upper Pedestal Tube into the top of the Lower Pedestal Tube and screw the
Tubes together.
Tubes together.
2. Insert pedestal feet into pedestal base until they click into place. Place pedestal
base on a flat, level surface.
3. Insert slotted end of assembled pedestal tube into center hole of pedestal base
and push down firmly.
4. Place grill base on top of pedestal tube assembly, ensuring hole in center of grill
base engages with tube.
5. Place drip tray securely into position inside grill base.
6. Position grill plate securely on grill base.
7. Position probe receptacle through probe cutout in top side of grill base.
8. Attach lid handle to lid from the inside using rubber ringed fastener/hook.
9. Place lid over grill. Your grill is now ready to use!
6. Position grill plate securely on grill base.
7. Position probe receptacle through probe cutout in top side of grill base.
8. Attach lid handle to lid from the inside using rubber ringed fastener/hook.
9. Place lid over grill. Your grill is now ready to use!
GRILLING OUTDOORS
1. Turn temperature control probe to OFF position and attach securely into probe
receptacle.
2. Plug into standard electrical outlet. Align desired temperature setting with indicator
light. Place lid securely on grill. Allow grill to preheat to desired temperature – for
approximately 10 minutes.
approximately 10 minutes.
3. Carefully remove lid and place food onto grill; cover for most foods. Cook until
done, turning at least once halfway through cooking time for most food. Adjust
temperature as needed.
temperature as needed.
Tip: Light on temperature control probe will cycle on and off as grill thermostat
maintains proper temperature. This is normal operation.
Note: Condensation may collect on inside of lid when cooking.
maintains proper temperature. This is normal operation.
Note: Condensation may collect on inside of lid when cooking.