Honeywell HVC0001 Manual De Propietario
Owner’s Guide 400-305-000-EFS
2
ENG
LISH
The bath fan control has been designed to control a single-speed bath fan. To suit your lifestyle, it can
be programmed in any of the following modes of operation:
be programmed in any of the following modes of operation:
• Ventilation Mode
(see page 10)
• Customized Cycle Mode
(see page 12)
• Daily On/Off Mode
(see page 14)
• Manual Mode
(see page 16)
Unlike the four programmable modes mentioned above, the Countdown Mode
can easily be
activated by simply pressing a button (see page 17). In this mode, the fan is on until the end of the
programmed countdown time when the controller returns to the programmed mode.
programmed countdown time when the controller returns to the programmed mode.
This controller cannot be used with a load lower than 0.1 A or higher than 2.5 A.
The controller can be used to control a bath fan’s built-in light or a separate light
fixture connected to the bath fan control circuit. However, the light cannot be
independently controlled and will turn On or Off at the same time as the fan.
The controller can be used to control a bath fan’s built-in light or a separate light
fixture connected to the bath fan control circuit. However, the light cannot be
independently controlled and will turn On or Off at the same time as the fan.
About your programmable bath fan control
400-305-000-B (69-2316EFS-03).book Page 2 Monday, September 28, 2009 11:06 AM