Honeywell Honeywell Security | Protect What Matters Most Guía Del Usuario
– 9 –
QUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONS
NOTE: = Boxes represent the entering of your 4-digit user code.
SECURITY FUNCTIONS
Checking system status: ---------------------
STATUS
To arm in STAY mode: ----------------------
*+ STAY
To restart exit delay: -------------------------
*+ STAY OR STAY
To arm in AWAY mode: ---------------------
* + AWAY
To arm with NO DELAY: -------------------
* + AWAY or STAY + NO DELAY
To arm if Quick Arm is active: -----------
AWAY or STAY (hold down for at least 2 seconds)
To disarm system and silence alarms:
+ OFF
Note: During Entry Delay or when an Alarm Condition exists, the LynxSIA Plus can be disarmed by entering the User
Code. Entering the OFF key is not required
To bypass a zone(s): ---------------------------
+ BYPASS + 2-digit zone number(s)
To turn Chime mode on or off: -----------
FUNCTION + CHIME
* Security code is not required if Quick Arm is active. Instead, press and hold down the STAY or AWAY key.
MESSAGE CENTER
To record a message: -------------------------
FUNCTION + RECORD
To stop recording before end of 85 secs:
OFF
To play back a message: ---------------------
FUNCTION + PLAY
To skip a message:
-----------------------------------
[✻]
To delete all messages:
---------------------------
FUNCTION + DELETE (during message replay)
VOLUME ADJUSTMENT
To adjust message playback/announcement volume:
FUNCTION + VOLUME + [3] or [6]
To mute system announcements: -------
FUNCTION + VOLUME + OFF
To restore/unmute announcements:----
FUNCTION + VOLUME + [3] or [6]
SPEAKER PHONE OPERATION
To enter speaker phone mode: -----------
[#] + AUX
To exit speaker phone mode: -------------
OFF
To enable/disable (toggle) ringer: ------
[#] + VOLUME + AUX
To return keypad to telephone mode
(after clearing an alarm or trouble or disarming the system):
[#] + AUX
To flash (switch back and forth between two calls using call waiting):
AUX
(
wait at least two (2) seconds before pressing AUX again)
(only if programmed
and system is armed
in Stay mode.)
and system is armed
in Stay mode.)