Zanussi ZDT24001FA Manual De Usuario

DEACTIVATING THE RINSE AID DISPENSER

While the appliance is in user mode:
1. Press

• The indicators

and

goes off.

• The indicator

starts to flash.

• The end indicator indicates the current setting: End indicator on = rinse aid dispenser activated.

2. Press

to change the setting. End indicator off = rinse aid dispenser deactivated.

3. Press the on/off button to confirm the setting.

BEFORE FIRST USE

1. Make sure that the current level of the

water softener agrees with the hardness

of the water supply. If not, adjust the level

of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any processing

residuals that can still be inside the appliance.

Do not use detergent and do not load the

baskets.

When you start a programme, the appliance can

take up to 5 minutes to recharge the resin in the

water softener. It seems that the appliance is not

working. The washing phase starts only after this

procedure is completed. The procedure will be

repeated periodically.
THE SALT CONTAINER

CAUTION! Only use salt specifically

designed for dishwashers.

The salt is used to recharge the resin in the water

softener and to assure good washing results in the

daily use.

Adding salt

Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after

you fill the salt container, start a programme.