Zanussi ZWF81463WH Manual De Usuario

The related indicator comes on.

With this option you can perform only a last

rinse of a selected washing programme.

If you set also the Extra Rinse function ( ) the

appliance adds two or more rinses.
The related indicator comes on.

With this option you can the spin and drain

cycle.
The spin phase is suitable to the washing

programme you set.

If you set also the No Spin ( )

option, the appliance only drains.

With this option you can set the number of

hours in which you would like your washing

programme to be completed.
You can set from minimum 3 hours to maximum

20 hours.
The display shows the number of hours and the
indicator above the button   is on.

With this option you can add some rinses to a

washing programme.
Use this option for persons allergic to

detergents and in areas where the water is soft.
The related indicator comes on.

With this option you can permanently have an

extra rinse when you set a new programme.
• To activate/deactivate this option touch

the buttons   and   at the same time until
the indicator   comes on/goes off.

With this option you can prevent that the

children play with the control panel.
• To activate/deactivate this option, touch

the buttons   and   at the same time until
the indicator   comes on/goes off.

Activate this option after you touch the button

 : the buttons are locked (except for the

button   ) .

This option stays active even when

you switch off the appliance.

The acoustic signals operate when:
• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic signals,
touch the buttons   and   at the same time

for 4 seconds.

If you deactivate the acoustic

signals, they continue operate when

the appliance has a malfunction.

1. Put a small quantity of detergent in the

compartment for washing phase.

2. Set and start a programme for cotton at the

highest temperature without laundry.

This removes all possible dirt from the drum and

the tub.

See in "Settings" how to activate this option.