Zanussi ZCG63330BA Manual De Usuario

• Clean stubborn dirt with a special oven

cleaner.

• Clean all accessories after each use and let

them dry. Use a soft cloth with warm water

and a cleaning agent.

• If you have nonstick accessories, do not

clean them using aggressive agents, sharp-

edged objects or a dishwasher. It can cause

damage to the nonstick coating.

Clean the oven door with a wet

sponge only. Dry it with a soft cloth.

Do not use steel wool, acids or

abrasive materials as they can

damage the oven surface. Clean the

oven control panel with the same

precautions.

Do not clean the catalytic surface

with oven sprays, abrasive cleaning

agents, soap or other cleaning

agents. This will damage the

catalytic surface.

Spots or discolouration of the

catalytic surface have no effect on

catalytic properties.

Keep children away when you clean

the oven at a high temperature. The

oven surface becomes very hot and

there is a risk of burns.

Always turn the oven light on while

using the catalytic cleaning (if

applicable).

Before activating the catalytic

cleaning remove all the accessories

from the oven.

The walls with a catalytic coating are self-

cleaning. They absorb fat which collects on the

walls while the appliance operates.
To support the self-cleaning procedure, heat

the empty oven on a regular basis.
1. Clean the oven floor with warm water and

washing up liquid, then dry it.

2. Set the maximum temperature and let oven

operate for 1 hour.

3. Set the oven temperature to 250 °C and let

the oven operate for 1 hour.

4. When the appliance is cool, clean it with a

soft and moist sponge.

The door glass in your product can

be different in type and shape from

the examples you see in the image.

The number of glasses can also be

different.

1. Open the door.

2. Hold the door trim on the top edge of the

door at the two sides and push inwards to

release the clip seal.

3. Pull the door trim to the front to remove it.

4. Remove the glass panels.

To install the panels, do the same steps in

reverse.

The door glass in your product can

be different in type and shape from

the example you see in the image.

The number of glasses can also be

different.

1. Push the door trim at one side to remove it.