Zanussi ZWF91483WH Manual De Usuario

1. Touch 

 .

The indicator of this button flashes.

2. Change the options. If you change any option

the Finish In option (if set) will be disabled.

3. Touch 

 again.

The programme continues.

1. Press the button   for some seconds to

cancel the programme and to deactivate the

appliance.

2. Press the same button again to activate the

appliance. Now, you can set a new washing

programme.

Before starting the new programme

the appliance could drain the water. In

this case, make sure that the detergent

is still in the detergent compartment, if

not fill the detergent again.

While a programme (or the 

) operates, the

appliance door is locked. The indicator 

 is on.

CAUTION! If the temperature and

level of the water in the drum are too

high, you cannot open the door.

1. Touch the button 

 to pause the appliance.

2. Wait until the indicator 

 goes off.

3. You can open the door.
4. Close the door and touch the button 

 again.

The programme (or the 

) continues.

AT THE END OF THE PROGRAMME
• The appliance stops automatically.

• The acoustic signal operates (if it is activated).
• In the display   comes on.
• The indicator of the button 

 goes off.

• The door lock indicator 

 goes off.

• You can open the door.

• Remove the laundry from the appliance. Make

sure that the drum is empty.

• Press the button   for some seconds to

deactivate the appliance.

• Close the water tap.

• Keep the door and the detergent drawer ajar, to

prevent the mildew and odours.

• The drum turns regularly to prevent the creases

in the laundry.

• The indicator 

 flashes to remind you to drain

the water.

• The door lock indicator 

 is on. The indicator

of button 

 flashes. The door stays locked.

• You must drain the water to open the door.
Draining the water:
1. To drain the water.

• Touch the button 

 . The appliance

drains the water and spins with the

maximum spin speed for selected washing

programme.

• Alternatively, touch the button   to change

the spin speed and then touch the button

. The appliance drains the water and

spins. If you set  , the appliance only

drains.

2. When the programme is completed and the

door lock indicator 

 goes off, you can open

the door.

3. Press the button   for some seconds to

deactivate the appliance.

The appliance drains and spins

automatically after approximately 18

hours (except for Wool programme).

AUTO-OFF OPTION
The AUTO-OFF stand-by option automatically

deactivates the appliance to decrease the energy

consumption. All the indicators and the display go

off when :
• You do not use the appliance for 5 minutes

before you touch 

.

Press the button   to activate the appliance

again.

• After 5 minutes from the end of the washing

programme.
Press the button   to activate the appliance

again.

The display shows the end of the last set

programme.
Touch the button   if you want to set a new

cycle.