Redmond RJ-M 906 Manual De Usuario

Descargar
Página de 23
7
ENGLISH
Instruction for use
For safety, at connection to a network, the device should be grounded.
 
device connection 
should be made only to the grounded sockets. otherwise the device will not meet 
the requirements protection against defeat by an electric current.
It is not authorized to use the device at any malfunctions. 
 
If the device is faulty, disconnect 
it  from  mains,  taking  out  a  plug  of  power  cord  from  the  socket,  and  address  the 
authorized service-centre.
Self  repair  or  modification  of  a  device  design  is  forbidden.  Service  and  repair  must  be 
 
carried out by authorized service-centres only. Nonprofessionally executed work can lead
to breakage, injuries and property damage.
Before cleaning the device be convinced, that it is disconnected from the mains.
 
Always keep the device clean. Do not immerse the basis of the device with motor, a power
 
cord and a plug in water.
For device cleaning use soap water, a sponge or a soft fabric. Do not use chemical and
 
abrasive means for device cleaning.
The device can be used only completely assembled. It must be operated domestically. The 
 
device is not intended for industrial use. 
Do not touch the rotating parts of the device, wait while rotation is completely stopped. Be
 
accurate in use.
Use oR toUCh the DevICe Is FoRBIDDeN At ANy MALFUNCtIoNs.
the MANUFACtUReR Does Not BeAR ResPoNsIBILIty FoR the
dAMAgES CAUSEd 
By vIoLAtIoN oF ReqUIReMeNts UNDeR sAFety PReCAUtIoNs AND
PRoDUCt seRvICe RegULAtIoNs.
Keep this instruction for further use
 
BEforE tHE fIrSt turN oN
take the device out of a box, carefully remove all packing materials and advertising
1. 
labels.
Be convinced, that the juice extractor is carefully turned off, i.e. the switch is in oFF
2. 
position.
Wipe the basis with the electric motor (2) by slightly damp fabric. Make it dry completely.
3. 
Wash out the following parts in warm soap water: Pusher (8), Lid with load tray (6), mesh
4. 
filter (5), pulp container (3), jug (11),foam separator (10). Be careful: edges of the mesh
filter (5) are very sharp. Make it dry completely.