Redmond RJ-907 Manual De Usuario

7

●

Independent repair or modification of a device design is forbidden. On service and repair

the authorised service-centre should carry out all works. Nonprofessionally executed work

can lead to breakage, to traumas and property damage.

●

Before device cleaning be convinced, that it is disconnected from the electric system.

●

Always support the device in a pure condition. Do not immerse the basis of the device with

the engine, a cord of a food and a plug of a cord of a food in water.

●

For device cleaning use soap water, a sponge or a soft fabric. Do not use chemical and

abrasive means for device cleaning.

●

The device can use only in completely collected kind. Operation should be made only in a

conditions of life, the device is not intended for industrial use.

●

Do not concern rotating parts of the device, wait, while rotation completely will stop. Be

accurate at use.

DEVICE USE IS FORBIDDEN AT ANy MALFUNCTIONS.

THE MANUFACTURER DOES NOT BEAR RESPONSIBILITy FOR THE

DAMAgES CAUSED

NON-OBSERVANCE OF REqUIREMENTS UNDER SAFETy PRECAUTIONS

AND PRODUCT SERVICE REgULATIONS.

●

Keep this instruction for further use

1.

Cautiously take out the device from a box, remove all packing materials and advertising

labels.

2.

Be convinced, that the juice extractor is disconnected, i.e. the switch is in position OFF.

3.

Wipe the basis with the electric motor slightly damp fabric. completely dry.

4.

Wash out warm soap water all details: Pusher, cover with a tray for giving of products,

the mesh filter, The separating container, glass for juice, the container for pulp. Be thus

accurate, edges of the mesh filter very sharp. Completely dry.