Binatone HCR 220 Manual De Usuario

6

66

66

!

Wipe the case of the appliance and

the working surface with slightly damp

soft cloth.
!

Only use the appliance for styling

dry hair. To achieve the optimum ef-

fect use hair styling products.

!

Read the information in the following table and choose

the most appropriate heating mode for you.

!

To make sure that you have chosen a proper mode,

check the operation of the appliance on a small lock of

your hair.

!

During the first use you may notice a small stream of

smoke or smell. It is normal and disappears very quickly.

Due to triple surface of the irons,

the time spent on the hair-do decreases

three times as compared to traditional

ways of curling.

1. Set the appliance on the support (5)

on a dry, even horizontal surface.

2. Connect it to the electricity supply

network and set the switch (7)

(7) to the desired mode.

The light indicator (6) 

(6) will light up, showing that the

irons are heating.

:  remember that at a high temperature the irons

will be very hot. Avoid contact of the skin with the hot
surface of the appliance, be very careful during use.

3. Wait till the irons heat up to the required temperature

(approximately 3 minutes).

4. Separate a small lock (25-30 mm wide) and comb it

from the roots to the ends of hair. To avoid a skin burn,

place a plastic comb at the roots of the lock. For the

best result you should start curling from the hair roots

and gradually move the appliance closer to the hair

ends.

5. Press the lever (3)

(3) to raise the clip for hair (2).

6. Place the lock between the work surface (1)

(1) and the

clip (2) 

(2) and carefully release the lever (3)

(3).

7. Keep the irons on each section of the lock for 10-30