Cuckoo Liiot LH-5312 N Manual De Usuario

Descargar
Página de 36
26
Preparations before use
Split water tank
When you splitr a water tank, split it after
turning locking bar as shown in figure, and
make sure to remove inappropriate 
substances in a water tank.
1
2
Unfasten water tank cover and
put tap water into water tank.
Put clean tap water into water tank. And
using water of water purifier will be better.
Don’t put water more than 40°C, aromat-
ic, chemicals and detergent into water
tank.
Don’t use underground water, otherwise it may
cause some problem.
Fasten water tank cover to avoid
any leakage of water and put a
water tank into the main body as
shown in figure.
When you put water tank into the main
body, check if water in water tank leaks
and water tank was put in the main body
completely.
3
4
Put a plug in the socket
Put a plug in the socket after water has
been put into water tank completely.
Make clean indoor environment accord-
ing to using method of control section.
CAUTION
Don’t put water into the main body after having put a plug in the socket. Otherwise 
electric shock can be caused.
Because water tank can get damaged if you drop it or it gets shock, give full attention.