Cisco Cisco UCS B440 M1 High-Performance Blade Server Guía Para Resolver Problemas
Contents
Introduction
Prerequisites
Requirements
Components Used
Support matrix
Related information
Introduction
This document describes the teaming and bonding options available for common operating
systems when using the Cisco Virtual Interface Card (VIC) adapters on the Cisco Unified
Computing System (UCS) B-Series servers
systems when using the Cisco Virtual Interface Card (VIC) adapters on the Cisco Unified
Computing System (UCS) B-Series servers
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco UCS and UCS Manager (UCSM)
●
Cisco VIC
●
VMware ESX Versions 4.1 and later
●
Microsoft Windows Server Version 2008 R2
●
Microsoft Windows Server Version 2012 and later
●
Linux operating systems
●
Components Used
The information in this document is based on these software and hardware versions:
UCSM version 2.2(6c)
●
Cisco UCS server with a VIC card
●
VIC firmware Version 4.0(8b)
●
VMware ESXi Version 5.5, Update 3
●
Microsoft Windows Server Version 2008 R2 SP1
●
Microsoft Windows Server Version 2012 R2
●
Redhat Enterprise Linux (RHEL) 6.6
●
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Support matrix